Mounting FileSystem From NVMe M.2 SSD

When mounting a NVMe M.2 SSD to ROScube, the storage will be appeared as a /dev/nvme0n1 storage.

1. Format NVMe M.2 SSD to EXT4 filesystem.

cd rootOnStorage/nvme
sudo ./copy-rootfs-nvme.sh
../../../../_images/nvme-copy1.png

Note

After finishing, you can see to-chk=0/*.

2. Setup the service.

This will copy the .service file to the correct location, and install a startup script to set the rootfs to the SSD.

sudo ./setup-service.sh
../../../../_images/nvme-setup1.png

Note

After setting up the service, reboot for the changes to take effect.