Flash System Image to Target MachineΒΆ
Once you prepared rootfs in step: customize rootfs. You can use flash.sh tool to flash image to target machine.
Note
Remember to put machine into recovery mode before flashing.
cd <driver package>
# Put machine into recovery mode first.
sudo ./flash.sh <target name> mmcblk0p1
Model |
Target Name |
|---|---|
RQX-590 |
jetson-agx-orin-rqx59x |
RQX-580 |
rqx_580 |
RQX-58G |
rqx_58g |
NPN-1 (Pico Nano) |
npn1 |
NPN-2 (Pico AGX NX) |
npn2 |
Note
The flashing procedure might take 8 ~ 10 minutes.